Insulated Bulkheads |
Know what you want? |
Universal Insulated Bulkhead
|
Description:
The UB-1 Universal Bulkheads, UB1 S (Short) and UB1 T (Tall) are designed to fit a variety of Trucks & Trailers that may have varying interior height and widths. The Universal Bulkhead is best suited for fleets that have difficulty matching a specific sized Bulkhead in the appropriate vehicle. Fleets such as this find it is much easier to use a Universal Bulkhead as it has a 10 in variation which means that any Bulkhead will do the job. The Universal Bulkhead has a built in "vent" capability and can therefore be used in a 2-temperature configuration trucks or trailers. Just pull the top away from the ceiling a couple of Inches and you have a Vent! A Universal Bulkhead is a great solution if you operate a warehouse where hot dock loading occurs and rear doors have to be open. As you can't always tell what trailer is coming in, you can't know the size. With the Universal Bulkhead it's not a problem. The Bulkhead will likely fit the trailer. More details... |
Skinny Bun Lite XP Insulated Bulkhead |
Description:
Less Weight in the trailer Duo Core Technology Superior no-Bolt UHMW Bottom scuff prevents wear as well as potential damage to products. Special Requirements: Will not withstand excessive impacts of severe bending above the bottom 18" Recommendations: Used where 15lb. Weight reduction in the vehicle is Critical. This product will have a long service life if NOT used in a high speed, high impact loading operation More details... |
DuraFlex Insulated Bulkhead
Description:
DuraFlex hinged folding Bulkhead is a flexible, laminated core Bulkhead capable of absorbing impacts, bending and flexing to nearly 90 degrees without breaking. The DuraFlex core is 2" thick and therefore is lighter than the 3" thick Skinny Bun Bulkheads. The DuraFlex comes standard with the UHMW plastic bottom scuff and 3" Side seals covered with 18 oz reinforced vinyl. The DuraFlex can be equipped with numerous options including E-Straps, F-Straps, Thermostatically controlled Fan, and Vent. More details... |
Cool Guard FLEX TOP Insulated Bulkhead
Description:
Cool Guard FLEX TOP is best suited for fleets that have difficulty matching a specific sized Bulkhead in the appropriate vehicle. The Cool Guard FLEX TOP has a heavy duty flexible vinyl hinge that enables the ability to with stand rotations that would normally be too strenuous on other products. The Cool Guard can be equipped with options such as E or F Straps, Adjustable Vent, Stenciling, Automatic Fan, Reinforced Hinge, HDPE Impact Plate The Cool Guard with purchase also comes with a 1- year warranty to protect your investment. More details... |
Cool Guard Insulated Bulkhead
Description:
Cool Guard is a lighter weight insulated bulkhead allowing for ease of use. The Cool Guard bulkhead has a heavy duty flexible vinyl hinge that enables the ability to with stand rotations that would normally be too strenuous on other products. The Cool Guard can be equipped with options such as E or F Straps, Adjustable Vent, Stenciling, Automatic Fan, Reinforced Hinge, HDPE Impact Plate The Cool Guard with purchase also comes with a 1- year warranty to protect your investment. More details... |
Skinny Bun Off - Center Hinge Portable Insulated Bulkhead
Description:
The Off-Center hinged Bulkhead is made in several models, by Both ITP and Randall. It is available in both 2" and 3" thick Bulkheads including the Skinny Bun, Duraflex, Cool Guard and 1500 Series Bulkheads. The primary purpose of an Off center hinge is that the short side be used as a door into the front compartment from the rear of the vehicle. It is important that the Bulkhead be equipped with a hard bottom scuff and handles mounted on the front and back, as shown here. The narrow side can be on the Roadside or Curbside (SHOWN HERE) of the Bulkhead This model Bulkhead can be equipped with E or F Straps. For 2 Temperature trucks or trailers, a thermostatically controlled Fan (as Shown here), or an adjustable Vent can be used. More details... |
Skinny Bun One Piece Insulated Bulkhead with Door (side or center)
|
Description:
The one piece Bulkhead with a door is designed to allow easy, frequent access from rear to front compartments. It can be equipped with a door at the Road side, Curb Side (shown here) or at the Center of the Bulkhead. The One Piece Bulkhead can be used in a true Multi Temp vehicle with a rear evaporator or equipped with a Fan and Vent ( shown here) to allow airflow front to back. The One-Piece Bulkhead is usually left in a static position, used most often in Straight Trucks and Storage Containers, for example, due to the difficulty in moving a bulkhead such as this, multiple times a day. The One-Piece Bulkhead is great for operations that do mostly non-mechanized loading and deliveries and there fore the Bulkhead is not moved during most of the time it's being used. More details... |
Two Piece Lifting Insulated Bulkhead System
Description:
The 2-Piece Lifting Bulkhead Systems operate within a specific area inside of the truck or trailer. The Bulkhead panels are mounted on a cross bar that is equipped with a roller assembly at each end. The roller assemblies traverse the length of the vehicle on tracks that are affixed to the upper corners of the truck body or trailer. The length of the track system - 10' to 20' -determines operating range within the vehicle. For loading or unloading, the Insulated panels can be raised & lowered separately or as one unit by using a pulley configured lifting system. More details... |
Available Options
|
Option application can vary depending upon the Bulkhead
|